How do you scale an object in Solidworks?

How do you scale down an object?

To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.

How do you change the size of a part in Solidworks?

To change a dimension:

  1. Double-click a dimension. The Modify dialog box appears.
  2. Change the dimension value with the arrows, thumbwheel , mouse wheel, or by typing in the dimension box. …
  3. Choose from: …
  4. Use the buttons as follows:

Can you scale a sketch in SOLIDWORKS?

(Sketch toolbar) or Tools > Sketch Tools > Scale. In the PropertyManager, under Entities to Scale, select sketch entities for Sketch item or annotations. , and then click in the graphics area to set the point to Scale about.

What is a 1/2 scale?

Half scale is 1:2. It is helpful to think of this as one unit on the drawing equals two units on the object. … This means the drawing of the object is twice as large as the object itself. Designers use an enlarged scale, such as double scale, on objects that are too small to draw full size with any meaningful detail.

IMPORTANT:  Is it OK to delete Autodesk?

How do I calculate scale?

To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.

How do you repair dimensions in SOLIDWORKS?

To set a fixed length:

  1. Select the spline to dimension.
  2. Click Smart Dimension (Dimensions/Relations toolbar) or Tools > Dimensions > Smart Dimensions.
  3. Click anywhere on the spline to place the dimension and click. …
  4. Drag an endpoint of the spline.

How do you change inches to mm in SOLIDWORKS?

Changing units in the SOLIDWORKS user interface could not be simpler. Go to Tools>Options>Document Properties>Units to change the units that are being used within the SOLIDWORKS design environment.

How do I change the smart dimension units in SOLIDWORKS?

It is sometimes required to change the unit system of a particular file. This can be done by changing the Units settings from Tools > Options > Document Properties > Units. The same menu can be accessed in the bottom right hand corner of the SOLIDWORKS window.

How do you scale blocks?

To Ensure Uniform Scaling in a Block Reference

  1. Click Drafting tab > Block panel > Block Editor.
  2. Open the block definition in the Block Editor.
  3. In the Block Editor, make sure nothing is selected.
  4. In the Properties Inspector, under Block, click Scale Uniformly.
  5. On the drop-down list, select Yes.