What size trailer will a Yamaha Rhino fit on?
The average truck can not fit a Yamaha Rhino. Only long bed trucks will be able to safely haul one. The Rhino’s dimensions are 56″X108″, meaning that even with a long bed truck, the tailgate will need to be down to accommodate the Rhino. Let’s talk about hauling your Yamaha Rhino!
Will a Yamaha Rhino fit on a 5×10 trailer?
Coastie, my Rhino was a tight fit on my 5×10 foot trailer. About 1″ to spare on sides, and with the ramp up, about 5 to 6″ at the rear with the front wheels almost touching the front rail of the trailer.
How much can a Yamaha Rhino pull?
Yamaha Rhino 660
|Type||660cc liquid-/oil-cooled w/fan, SOHC four-stroke; 5-valve|
|Dry Weight||1049 lb.|
|Bed Capacity||400 lb.|
|Towing Capacity||1212 lb.|
What are the dimensions of a Yamaha Rhino?
2006 Yamaha Rhino 660 Auto 4×4 Specifications
|Width (in/mm)||54.5 / 1384.3|
|Height (in/mm)||73 / 1854.2|
|Wheelbase (in/mm)||75.2 / 1910.1|
Will a Kawasaki Mule fit on a 5×8 trailer?
I sell Polaris, Kawasaki, and CanAm UTVs and we do not have much that will fit on a 5×8. I would make sure whatever you get is 6′ wide and at least 12′ long. Weight is going to be a big issue on that size of a trailer.
What size trailer should I buy?
Regarding size, it’s standard advice to buy a trailer that is the same width or a bit wider than the towing vehicle. This improves maneuverability and reduces wind drag. Make sure to check out the legal size requirements in your area and measure your storage space to ensure it’ll fit.
Will a UTV fit on a 5×8 trailer?
The answer to that question is no, most models of UTVs. will not fit on a 5×8 trailer. There are only 9 out of 133 models (6.8%)on this extensive list that will fit on a 5×8 trailer. Some of them may not fit depending on the quality and size of your trailer because they are exactly 60 inches (5 feet).
How many hours will a Yamaha Rhino last?
It all depends on how it is used and maintained. 500 hours may seem like a lot compared to other Rhinos but my average speed is 16mph so 500 hours would be 8,000 miles. I have around 358 hours and 5800 miles on my ’08 Rhino and it runs great.
How fast is a Yamaha Rhino 660?
Registered. CDI and Sheave (stock weights and springs), took my stock 660 from 42 mph (and on the limiter a lot), to 54 mph.
How does a Yamaha Rhino transmission work?
The job of the transmission is to change the speed ratio between the engine and the wheels. The CVT operates on a pulley system that allows an infinite variability between highest and lowest gears with no discrete steps or shifts. …