Question: How do you create a Workplane in Revit?

How do you create a work plane in Revit family?

What is the work plane command in Revit?

A work plane is a virtual 2-dimensional surface used as the origin for a view or for sketching elements. Work Plane Set or Show or Viewer. on the Architecture, Structure, or Systems tab in projects. on the Create tab of the Family Editor.

How do you make a sloped work plane in Revit?

To create the named Reference Plane, go to any of the primary discipline tabs in Revit: Architecture, Structure or Systems. On the Work Plane Panel select Reference Plane. Select the intersection of the grid and the level at the location where you want to start the reference plane at and draw at the desired angle.

What is a reference plane Revit?

Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model. Topics in this section. Add a Reference Plane. Use the Line tool or the Pick Line tool to draw a reference plane.

IMPORTANT:  Where do architectural technicians work?

How do you edit a work plane in Revit?

Change the Work Plane of an Element

  1. Select a work plane-based element in a view.
  2. Click Modify | <Element> tab Work Plane panel (Edit Work Plane). …
  3. In the Work Plane dialog, select another work plane. …
  4. If needed, reposition the element on the work plane.

How do you set a work plane?

Select a work plane-based element in a view. Click Modify | <Element> tab Work Plane panel (Edit Work Plane).

In the Work Plane dialog, select another work plane.

  1. Name—Choose an available work plane from the list, and click OK. …
  2. Pick a plane—Revit creates a plane coincident to the selected plane.

What is a working plane in lighting?

(Term of lighting design) An imaginary horizontal plane situated at the nominal working height in an interior space. Most illuminance and daylight factor measurements and calculations are made for points on this plane.

How do I delete a work plane in Revit?

Use the Delete item to delete the active Workplane. To delete the active Workplane click Workplane tab > Active panel > Delete.

How do you make a sloped extrusion in Revit?

Create a Roof by Extrusion

  1. Display an elevation, 3D, or section view.
  2. Click Architecture tab Build panel Roof drop-down (Roof by Extrusion).
  3. Specify the work plane.
  4. In the Roof Reference Level and Offset dialog, select a value for Level. …
  5. To raise or lower the roof from the reference level, specify a value for Offset.

How do you make a reference plane in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

  1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
  2. To draw a line: On the Draw panel, click (Line). …
  3. To pick an existing line: On the Draw panel, click (Pick Lines).
IMPORTANT:  How can I bypass AutoCAD license?

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

How do you add references in Revit?

Add a Reference Plane

  1. On the Draw panel, click (Pick Lines).
  2. On the Options bar, specify an offset, if desired.
  3. Select the Lock option to lock the reference plane to the line.
  4. Move the cursor near the line to which you want to place the reference plane and click.

What is the use of reference plane?

In celestial mechanics, the plane of reference (or reference plane) is the plane used to define orbital elements (positions). The two main orbital elements that are measured with respect to the plane of reference are the inclination and the longitude of the ascending node.