How do you shell in AutoCAD?

What is SHELL command why it is used in AutoCAD?

Accesses operating system commands. When SHELL prompts you for an OS command, you can enter most valid commands for your OS. When the command has been executed, SHELL returns you to the Command prompt.

How do you make a solid face in AutoCAD?

Extrude a Bounded Area on a 3D Solid Face

  1. Click Home tab Modeling panel Presspull. Find.
  2. Click a face on a 3D solid object and move the cursor to establish an offset direction. Edge highlighting indicates which faces can be offset.
  3. Enter a value or click in the drawing area to set the extrusion distance.

How do I fill an area in AutoCAD?

To Hatch or Fill an Object or an Area

  1. Click Home tab Draw panel Hatch. …
  2. On the Properties panel Hatch Type list, select the type of hatch that you want to use.
  3. On the Pattern panel, click a hatch pattern or fill.
  4. On the Boundaries panel, specify the how the pattern boundary is selected:

How do I shell in AutoCAD 2020?

To Create a 3D Solid Shell

  1. Click Home tab Solid Editing panel Solid Edit drop-down Shell. Find.
  2. Select the 3D solid object.
  3. Select one or more faces to be excluded from shelling and press Enter.
  4. Specify the shell offset distance. …
  5. Press Enter to complete the command.
IMPORTANT:  Quick Answer: Why do architects use plan and not sketch?

How do I use solid edit in AutoCAD?

Grip-editing is one of the most direct ways to modify an object. To edit a 3D solid by using grips, select the 3D solid when no command is running, and then select the grip that you want to use to edit the solid.

What is Polysolid in AutoCAD?

With the POLYSOLID command, you can convert an existing line, 2D polyline, arc, or circle to a solid with a rectangular profile. A polysolid can have curved segments, but the profile is always rectangular by default. You can draw a solid with POLYSOLID just as you would a polyline.

How do I convert 3D face to 3D in AutoCAD?

Solution

  1. Enter CONVTOSURFACE on the command line.
  2. Select the face that you want to convert.
  3. Enter THICKEN on the command line.
  4. Select the surface.
  5. Enter a thickness value for the selected surface on the command line.
  6. When prompted, choose whether or not to erase the defining surface.