How do you make a ball in Revit?

How do you create shapes in Revit?

Create solid geometry with the Create Form tool.

  1. On the Create tab Draw panel, select one of the drawing tools.
  2. Click in the drawing area, and draw a closed loop.
  3. Select the closed loop.
  4. Click Modify | Lines tab Form panel (Create Form).

What is massing and site in Revit?

Create a mass that is specific to the context of the current project. This mass cannot be reused in other projects. Click Massing & Site tab Conceptual Mass panel (In-Place Mass). … The application window displays the conceptual design environment. Create the desired shapes using the tools on the Draw panel.

How do you make curves in Revit?

Sketch a smooth curve that passes through or near specified points.

  1. Select a tool that allows for a spline. …
  2. Click Place Lines tab (or respective Place tab or Create tab) Draw panel (Spline), and place the cursor in the drawing area.
  3. Click to specify the start point for the spline.

How do I make a model in place in Revit?

Create an In-Place Element

  1. Open a project.
  2. On the ribbon, click (Model In-Place). …
  3. In the Family Category and Parameters dialog, select a category for the element, and click OK. …
  4. In the Name dialog, type a name, and click OK. …
  5. Use the Family Editor tools to create the in-place element.
IMPORTANT:  Best answer: How do I make multiple views in Revit?

What is an in Place model in Revit?

Description. An introduction to the in-place modeling tools. When working in Revit, you will place many instances of component families, such as doors, windows, light fixtures, and so on. These families are created from standard family templates, and come in standard sizes and types.

How do you create an extrusion in Revit 2020?

Create an Extrusion

  1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
  2. Use the sketching tools to sketch the extrusion profile: …
  3. On the Properties palette, specify the extrusion properties: …
  4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
  5. To view the extrusion, open a 3D view.