How do you extrude a slab in Revit?

How do you extrude floor in Revit?

Create an Extrusion

  1. In the Family Editor, on the Create tab Forms panel, do one of the following: …
  2. Use the sketching tools to sketch the extrusion profile: …
  3. On the Properties palette, specify the extrusion properties: …
  4. Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). …
  5. To view the extrusion, open a 3D view.

How do you create a curved extrusion in Revit?

Extrude a profile curve along a path curve

  1. Create the curves you will use for the profile and path.
  2. Choose Surfaces > Swept Surfaces > Extrude from the tool palette.
  3. Pick the curve or curves you want to extrude. …
  4. Click Go.
  5. Pick the path curve to extrude along.

How do you add a material to an extrusion in Revit?

To apply a material to a solid extrusion by category, under Materials and Finishes, click in the Material field, click , and specify a material. To assign a solid extrusion to a subcategory, under Identity Data, for Subcategory, select a subcategory. Click Apply.

IMPORTANT:  How do I change paragraph spacing in AutoCAD?

Can you extrude lines in Revit?

Click Modify | Create Extrusion tab Mode panel (Finish Edit Mode). Revit completes the extrusion and returns you to the view in which you started the extrusion. To view the extrusion, open a 3D view. To resize the extrusion in the 3D view, select it and use grips to edit it.

How do you select floors in Revit?

In a plan view, select the floor, and click Modify | Floors tab Mode panel Edit Boundary. Watch the tooltip and the status bar to be sure you select the floor, not another element. If desired, you can use a filter to select the floor.

Where is the Create tab in Revit?

The Create Tab is only visible when working with Family Editor tools. You must be editing a family in order to have access to the tools on the Create Tab.

Solution

  1. On the ribbon, click (Model In-Place). …
  2. In the Family Category and Parameters dialog, select the family category, and click OK.

Where is the work plane command in Revit?

Set the Work Plane of a View

  1. On the ribbon, click (Set). Architecture tab Work Plane panel (Set) …
  2. In the Work Plane dialog, under Specify a new Work Plane, select one of the following options: …
  3. If the selected plane is perpendicular to the current view, the Go to View dialog opens.

Where is Family Editor in Revit?

Select an instance of the family in the drawing area, and click Modify | tab Mode panel (Edit Family). Double-click an instance of the family in the drawing area. Note: The double-click editing behavior is determined by the setting for the Family element type in the Double-click Options.

IMPORTANT:  What are the measurements of a Yamaha Rhino?

How do you blend in Revit?

To create a blend, select the blend command. You are placed in the Sketch mode. Select a tool from the Draw menu to draw a closed-loop sketch for the base of the blend. Once the base sketch is complete, click Edit Top on the Mode panel of the contextual tab.

How do you make a 3D model in Revit?

Create a Perspective 3D View

  1. Open a plan, section, or elevation view.
  2. Click View tab Create panel 3D View drop-down Camera. …
  3. Click in the drawing area to place the camera.
  4. Drag the cursor to the desired target and click to place it.

How do you change a void extrusion in Revit?

On the Properties palette, change the visibility, material, or subcategory of the extrusion, if desired. To change the extrusion to a solid or a void, under Identity Data, for Solid/Void, select Solid or Void. Click Apply. Click Modify | Edit Extrusion tab Mode panel (Finish Edit Mode).

How do I paint in Revit?

Example

  1. Click Modify tab Geometry panel (Paint).
  2. In the Material Browser dialog, select a material. Note that you can only browse for a material when you select the paint tool.
  3. Place the cursor on the element face to highlight it. …
  4. Click to apply the paint.
  5. In the Material Browser dialog, click Done.