How do you do model contours in Revit?

How do you do contours in Revit?

Create a Toposurface by Placing Points

  1. Open a 3D view or a site plan view.
  2. Click Massing & Site tab Model Site panel (Toposurface).
  3. On the Options Bar, set a value for Elevation. …
  4. Next to the Elevation text box, select one of the following: …
  5. Click in the drawing area to place points. …
  6. Click (Finish Surface).

How do you get topography in Revit?

In Revit, link the topography to the current model as follows:

  1. Specify coordinates for the building model. …
  2. Open a plan view or a 3D view for the building model. …
  3. Click Insert tab Link panel (Link Topography).
  4. In the Link Topography dialog, navigate to the topography. …
  5. Select the desired topography, and click Link.

How do I make a model site in Revit?

Create the Site Plan

  1. Define site settings. …
  2. Create the toposurface. …
  3. Rotate the project to True North. …
  4. Specify property lines. …
  5. Add a building pad. …
  6. Grade the toposurface. …
  7. Create parking lots, roads, and sidewalks. …
  8. Add site components.
IMPORTANT:  How do you color surfaces in Catia?

How do you edit contour lines in Revit?

Open a site plan view, and select a contour line label. Click Modify | Contour Labels tab Properties panel (Type Properties).

Change the Appearance of Contour Line Labels

  1. Click Duplicate.
  2. Enter a name for the new contour label type, and click OK.
  3. Change the parameters as desired, and click OK.

How do you add topography in Revit 2020?

In Revit, link the topography to the current model as follows:

  1. Specify coordinates for the building model. …
  2. Open a plan view or a 3D view for the building model. …
  3. Click Insert tab Link panel (Link Topography).
  4. In the Link Topography dialog, navigate to the topography. …
  5. Select the desired topography, and click Link.

Where are Revit site settings?

To access the Site Settings dialog, click the dialog launcher on the Model Sight panel. In the Site Settings dialog, you can modify the contour line display by adding contours. To do this, click Insert. Change the Start, Stop, and Increments values and select the desired Range Type and Subcategory.

How do you change topography in Revit?

Click Modify | Topography tab Surface panel (Edit Surface). Click Edit Surface tab Tools panel (Simplify Surface). Open the site plan view and select the toposurface. Enter a value for surface accuracy, and click OK.

How do I create a site plan in Revit 2021?

Create the Site Plan

  1. Define site settings. …
  2. Create the toposurface. …
  3. Rotate the project to True North. …
  4. Specify property lines. …
  5. Add a building pad. …
  6. Grade the toposurface. …
  7. Create parking lots, roads, and sidewalks. …
  8. Add site components.
IMPORTANT:  You asked: How do I make text transparent in AutoCAD?

How do I show site plans in Revit?

Open the Site view. Click View tab Graphics panel View Templates drop-down (Apply Template Properties to Current View). In the Apply View Template dialog, under View Templates, select Site Plan. Note: If there is not a template for a site plan, you will need to set the View Properties manually.

How do I show a floor plan in Revit?

Solution: Create a site view as follows:

  1. Click View tab Create panel Plan Views drop-down (Floor Plan).
  2. In the New Plan dialog, clear Do not duplicate existing views.
  3. Under Floor Plan views, select the level on which to base the site view.
  4. Click OK.

How do you hide contour lines in Revit?

To turn off the lines:

  1. Go to Visibility Graphics > Contour Lines.
  2. Uncheck Primary Contours and Secondary Contours.

How do you change the color of Toposurface in Revit?

To view or change toposurface or subregion properties, open a 3D view or a site plan view, and then click Site tab Model Site panel (Toposurface). Select the surface material from the list. You can create your own toposurface material. Topographical surfaces do not support materials with surface patterns.

What is a Toposurface in Revit?

The Toposurface tool defines a topographical surface (a toposurface) using points or imported data. You can create toposurfaces in 3D views or site plans.