How do you change the graphics phase in Revit?

How do you change the current phase in Revit?

Click Manage tab Phasing panel (Phases). In the Phasing dialog, click the Phase Filters tab. Click New to insert a new phase filter. The filter is assigned a default name.

How do I create a phase in Revit 2020?

Create a Phase

  1. Click Manage tab Phasing panel (Phases). The Phasing dialog opens, displaying the Project Phases tab. …
  2. Click the number box adjacent to a phase. Revit selects the entire phase row. …
  3. Insert a phase. …
  4. If desired, click the Name text box of a phase to rename it. …
  5. Click OK.

How do you filter by phase in Revit?

Create phase filters (in addition to the default filters) to control the display of elements based on their phase status.

  1. Click Manage tab Phasing panel (Phases).
  2. In the Phasing dialog, click the Phase Filters tab.
  3. Click New to insert a new phase filter. …
  4. (Optional) Click in the Filter Name box to edit the name.

What is the default phase in Revit?

By default, Revit Architecture provides two phases: Existing and New Construction. As it stands, everything you’ve placed into your model up to this point has been exclusively related to the New Construction phase.

IMPORTANT:  How do you filter a workset in Revit?

What is the project base point in Revit?

The project base point defines the origin (0,0,0) of the project coordinate system. Use the project base point as a reference point for measurements across the site. The survey point identifies a real-world location near the model, such as a corner of the project site or the intersection of 2 property lines.

How do I use phases in Revit?

Create a Phase

  1. Click Manage tab Phasing panel (Phases). The Phasing dialog opens, displaying the Project Phases tab. …
  2. Click the number box adjacent to a phase. Revit selects the entire phase row. …
  3. Insert a phase. …
  4. If desired, click the Name text box of a phase to rename it. …
  5. Click OK.

How do I delete a phase in Revit?

To demolish stuff in Revit, you need to use the Magic Hammer of Destruction, located in the Modify tab. Click on the element you want to demolish and it will be set to “demolished” in the current phase. You can also simply select an element and set the “New” phase in Phase Demolished properties.

How do I create a halftone in Revit?

Define Halftone/Underlay Settings

  1. Click Manage tab Settings panel Additional Settings drop-down (Halftone/Underlay).
  2. In the Halftone/Underlay dialog, under Underlay, define the following settings: …
  3. Under Halftone, for Brightness, enter a value or use the slider to specify a setting between Light and Dark. …
  4. Click OK.