How do I use constraints in Catia v5?

What are constraints available for assembly?

Constraints allow you to position mechanical components correctly in relation to the other components of the assembly. You just need to specify the type of constraints you wish to set up on one or between two or between three components, and the system will place the components exactly the way you want.

How do I change constraints in Catia?

Renaming Constraints

You can rename a constraint by selecting it and by using the XXX. N. object > Rename parameter contextual command…. In the dialog box that appears, you just need to enter the name of your choice.

What is the purpose of using assembly constraints?

Assembly constraints establish the orientation of the components in the assembly and simulate mechanical relationships between components. For example, you can: Mate two planes. Specify that cylindrical features on two parts remain concentric.

What are the 5 main constraints in an assembly?

First, click the Constrain command and a window will pop up. There are 4 tabs: Assembly, Motion, Transitional, and Constraint Set. The one we will use first is the Assembly. There are 5 different types of constrains in the Assembly tab: Mate, Angle, Tangent, Insert, and Symmetry.

How do you mirror Catia?

Mirroring a part is only possible in the unfolded view.

  1. Click Mirror . The Mirror definition dialog box is displayed.
  2. Right-click on the Mirroring plane field and select Create Plane. …
  3. Create a plane as shown below.
  4. Click OK in the Plane Definition dialog box. …
  5. Click OK in the Mirror definition dialog box.
IMPORTANT:  Your question: How do you turn a curve into a sketch in Solidworks?

How do I mirror components in Catia?

For a part or assembly that is to be mirrored, create an assembly and insert the part or subassembly into it. In the assembly select the Create Component in Assembly icon or Insert>Component>Create. In the dialog box under the partor subassembly selection choose mirror. Save the parts.

Where is the command in CATIA V5?

Select Edit > Search (or press Ctrl+F ). The Search dialog box appears. Click the General tab: The Search command does not prevent you from running other commands on the search results (once selected).