How do I ground a part in Solidworks?

What is a ground plane in Solidworks?

You can define a ground plane in an assembly. When you insert a published asset into the assembly, the asset’s ground face snaps to the assembly’s ground plane. … Ground Plane appears in the FeatureManager design tree. When you insert an asset, the asset’s ground face snaps to the assembly’s ground plane.

How do you lock a part in place in Solidworks assembly?

To lock, unlock, or break the external references:

  1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
  2. Click List External Refs. …
  3. View information and set options in the External References For dialog box. …
  4. Click OK.

How do you Unfix a part in Solidworks?

To fix or float an assembly component:

  1. Right-click the component in the graphics area or the component’s name in the FeatureManager design tree.
  2. Select Fix or Float.
  3. In assemblies with multiple configurations, select This Configuration, All Configurations, or Specified Configurations.

When defining a ground plane in an assembly the reference feature can only be a plane?

You can define multiple ground planes in an assembly. You can have only one active ground plane at a time.

IMPORTANT:  Your question: How do you save symbols in AutoCAD?

How do you break references in Solidworks assembly?

Locking and Breaking External References

  1. In the FeatureManager design tree: For an individual item, right-click the feature, component, body, or part. …
  2. Click External References. …
  3. To modify external references, select the external references and click Break Selected, Lock Selected, or Unlock Selected. …
  4. Click OK.

What does lock mate do solidworks?

A Lock mate maintains the position and orientation between two components. The components are fully constrained relative to each other. A Lock mate has the same effect as forming a subassembly between the two components and making the subassembly rigid.

How do I unlock a Solidworks file?

To unlock a locked object, click File > Unlock. The Check Out command automatically removes the lock from an object.

Where is break link in Solidworks?

In the FeatureManager design tree, right-click the inserted third-party native CAD file and click Break Link.

Can we apply the fixed angle mate between two curves?

Click Mate (Assembly toolbar) or Insert > Mate. In the Mate PropertyManager, if you use a single entity curve in Step 1: Under Mate Selections, click Entities to Mate , and select the curve and a point on the assembly. Select Coincident for the mate type.

Why is part fixed in Solidworks assembly?

It is recommended that at least one assembly component is either fixed, or mated to the assembly planes or origin. This gives a frame of reference for all other mates, and helps prevent unexpected movement of components when mates are added. A fixed component has a (f) before its name in the FeatureManager design tree.

IMPORTANT:  Can I delete solidworks Downloads folder?